①沒有設備壓力表或設備：一些實用程序喜歡校準測試儀，這些設施一般很好地為他們的現場人員提供銜接檢測設備，可是有些設備甚設備配件的接口。盡管沒有規則，可是這樣規劃以便能夠看到設備的實際壓力。即使有監督操控和數據采集和遙測能力，有人在某一點將站在設備旁邊，需求看看壓力是什么，那是那么便利
① No equipment pressure gauge or equipment: some utilities like to calibrate the tester. These facilities generally provide a good interface for their field personnel to connect with the testing equipment, but some equipment and even equipment accessories can be connected. Although there are no rules, it is planned so that you can see the actual pressure on the equipment. Even with the ability of supervisory control and data acquisition and telemetry, someone will be standing next to the equipment at a certain point and need to see what the pressure is. That's so convenient
②設備空間太小：假如很麻煩設備一個設備站，或許觸及挖掘混凝土等工作，不要企圖經過使它盡或許削減設備空間，節省那點本錢。在后期進行根本的維護將是非常困難的。還要記住一點：東西或許會很長，因而需求設置空間預留空間，以便可以松開螺栓。
② Equipment space is too small: if it is very troublesome to equip an equipment station, or touch the excavation of concrete and other work, do not try to make it as far as possible to reduce the equipment space, save the cost. It will be very difficult to carry out fundamental maintenance at a later stage. One more thing to remember: things may be very long, so you need to set up space for the bolts to loosen.
③不考慮后期拆卸：大多數時分，設備人員明白，你不能在一個混凝土室中將一切東西銜接在一起，而不需求某種類型的銜接，以便在將來的某個時刻去除部件。假如一切的部件都緊緊地擰緊，沒有間隙，將它們分開幾乎是不或許的。無論是槽型聯軸器，法蘭接頭仍是管接頭，都是必要的。在將來，有時或許需求移除部件，而且盡管這一般不是設備承包商的擔心，可是它應該是一切者和工程師的重視。
③ Don't think about late dismantling: most of the time, equipment personnel understand that you can't connect everything together in a concrete chamber without requiring some kind of connection to remove the parts at some point in the future. If all the parts are tightly tightened and there is no gap, it is almost impossible to separate them. Whether it is groove type coupling, flange joint or pipe joint is necessary. In the future, it may sometimes be necessary to remove parts, and although this is not generally the concern of equipment contractors, it should be the concern of all parties and engineers.
④同心異徑管水平設備：這或許是吹毛求疵，可是也值得重視。偏疼異徑管可以水平設備。同心異徑管是設備在垂直線。在一些使用中需求設備在水平線，要使用偏疼減速器，但這個問題一般觸及到本錢：同心異徑管廉價。
④ Concentric reducers horizontal equipment: this may be nitpicking, but it's worth noting. Migraine reducers can be horizontal devices. Concentric reducers are equipment in the vertical line. In some applications, the equipment is required to be in the horizontal line, and the migraine reducer should be used, but this problem generally involves the cost: the concentric reducer is cheap.
此外，當釀酒設備的壓力下降時，空氣從懸浮液中排出而且被轉移到管道中，這將導致設備下流出現問題。 一個簡單的放氣設備將脫節或許存在的任何空氣，并將防止下流的問題。 操控設備上游的放氣設備也是有用的，由于引導管線中的空氣或許導致不穩定性。
In addition, when the pressure of the brewing equipment drops, the air is discharged from the suspension and transferred to the pipeline, which will cause problems of equipment downflow. A simple venting device will disconnect any air that may be present and will prevent downflow problems. It is also useful to operate the venting equipment upstream of the equipment, as air in the pilot line may cause instability.
自動售酒機 2024-07-25 
