不銹鋼內膽實木酒桶可以說一款性價比極好的儲酒容器，其內膽是儲酒的關鍵，選用不銹鋼作為內膽的材料能夠有效的阻止酒類產品的揮發，同時還能保證酒類產品的口感和純度。在加上其外面還有一層實木，不僅給其外觀增添了一些特色，還其內膽得到了良好的保護。那么下面我們就具體的聊聊它的配置要求都有哪些吧。
Stainless steel inner liner solid wood barrel can be said to be an excellent cost-effective wine storage container. Its inner liner is the key to wine storage. Choosing stainless steel as inner liner material can effectively prevent the volatilization of wine products, while ensuring the taste and purity of wine products. In addition, there is a layer of solid wood outside, which not only adds some features to its appearance, but also provides good protection for its inner gallbladder. Then let's talk about its configuration requirements.
不銹鋼內膽實木酒桶的配置要求：
Configuration requirements of stainless steel inner liner solid wood barrel:
1、由于白酒是一種易揮發、易燃、易爆的介質，特別是貯存的基酒度數高，設計時要滿足危險化學品容器設計需要，布局上要服從和滿足消防設計要求，強度設計上要引用/T4735鋼制焊接常壓容器設計準則，選用焊接系數應不大于0.7。對特殊地理環境和地質構造上建設的白酒企業，設計上要充分考慮臺風和地震等自然災害的影響。
1. Because liquor is a volatile, flammable and explosive medium, especially the high degree of base liquor stored, the design should first meet the design needs of hazardous chemical containers, the layout should comply with and meet the fire safety design requirements, the strength design should refer to the design criteria of /T4735 steel welded atmospheric pressure vessels, and the welding coefficient should be less than 0.7. For liquor-making enterprises built in special geographical environment and geological structure, the influence of natural disasters such as typhoons and earthquakes should be fully considered in design.
2、材料使用上要選用鋼板生產廠家的304系列鋼板，并符合國標對板厚要求。鋼板厚度嚴禁低于國標通用標準。并對材料進行適當的化學成分抽樣檢驗。
2. In the use of materials, 304 series of high-quality steel plates from excellent steel plate manufacturers should be selected and meet the requirements of national standards for plate thickness. The thickness of steel plate is strictly prohibited to be lower than the general national standard. The appropriate chemical composition of the material was sampled and tested.
3、制造上要采用鎢極氬氣保護焊，3mm以下的鋼板焊接宜采用普瑞特公司的水焊接法，并保證焊縫飽滿焊透，焊接過程中注意焊接接頭的相位變化，必要時要做金相分析，保證焊縫成形后的內在質量，下封頭和4mm以上鋼板要采用雙槍焊接法，保證焊縫飽滿焊透。
3. Tungsten Argon shielded arc welding should be used in manufacturing. The water welding method of Pratt Company should be used for steel plate below 3mm, and the full penetration of the weld should be ensured. The phase change of the welded joint should be noticed in the welding process. Metallographic analysis should be done when necessary to ensure the internal quality of the weld after forming. Double gun welding method should be used for steel plate below the head and above 4mm to ensure the full penetration of the weld.
4、質量控制上，要突出白酒介質的特性，對焊縫和部位進行控制，對下封頭所有焊縫和下筒體與下封頭間的環焊縫必須進行100%的表探，表探合格后進行盛水試漏試驗。（具體的相關內容請參考仁泰酒容器《為什么酒廠都喜歡用不銹鋼儲酒器？》的相關內容）
4. In quality control, we should highlight the characteristics of liquor medium, control the key welds and positions, and conduct 100% surface inspection on all welds of the lower head and the circumferential welds between the lower cylinder and the lower head, and conduct leak test after the surface inspection is qualified. (For details, please refer to Rentai Wine Container Why Winery prefer stainless steel wine storage? 》 Relevant content)
5、由于白酒生產工藝中經常使用活性炭對白酒進行澄清處理，去除酒體中的異雜味，而活性炭的成份中含有大量的氯離子，處理過程中，活性炭會附于罐底，氯離子會對不銹鋼產生腐蝕，形成所謂的“點狀”銹蝕，影響容器的使用壽命。因此，在生產使用過程中，要勤清理活性炭附著物，也可在此類罐底部涂附環氧樹脂，隔離活性炭中氯離子對不銹鋼的侵蝕。
5. Activated carbon is often used in liquor production process to clarify liquor and remove odors in liquor. Activated carbon contains a lot of chloride ions. Activated carbon will be attached to the bottom of the tank during the process of liquor production. Chloride ions will corrode stainless steel, forming so-called "dot" corrosion, affecting the service life of the container. Therefore, in the process of production and use, it is necessary to diligently clean up the attachment of activated carbon. Epoxy resin can also be coated on the bottom of such tanks to isolate the corrosion of stainless steel by chloride ions in activated carbon.
以上就是為您介紹的不銹鋼內膽實木酒桶的配置要求，您學會了嗎？另外在其外層加一層實木裝置，還可以對其起到一個保護的作用，以免在運輸的過程中造成磕碰，影響設備的質量。
Above is the configuration requirement of stainless steel inner tank solid wood barrel introduced to you. Have you learned it? In addition, adding a layer of solid wood device on its outer layer can also play a protective role, so as to avoid collision in the process of transportation and affect the quality of equipment.
自動售酒機 2024-07-25 
